Asterfusion® CX-T P4 Programmable Switch

  • CX564P-T
  • CX532P-T
  • CX312P-48Y-T

Provides integrated protocol-independent, network telemetry and intelligent service processing functions needed for mission-critical cloud data center networks


Product Specs

Product modelInterfaceSwitching Capacity
CX312P-48Y-T
48 x 25GE SFP28, 12 x 100GE QSFP28

4.8Tbps

CX532P-T
32 x 100GE QSFP28

6.4Tbps

CX564P-T
64 x 100GE QSFP28

12.8Tbps

Value Propositions

OAM simplification & Efficiency improvement

Asterfusion® CX-T switches combined with AFC (Asteria Fabric Controller) and K8s/OpenStack CNI & Neutron plug-ins can allow cloud data center administrators to automatically provision and offload overlay network configurations using the process compatible with their standard operational procedures. Through the REST APIs Asterfusion CX-T switches can also be integrated and controlled by third-party or customers' own management platforms for unified & efficient cloud data center control, orchestration and management. 

CapEx & OpEx Reduction

Asterfusion® CX-T switches combined with AFC (Asteria Fabric Controller) and K8s/OpenStack CNI & Neutron plug-ins can allow cloud data center administrators to automatically provision and offload overlay network configurations using the process compatible with their standard operational procedures. Through the REST APIs Asterfusion CX-T switches can also be integrated and controlled by third-party or customers’ own management platforms for unified & efficient cloud data center control, orchestration and management.

Rapid adaptation to market demands

Besides AsterNOS (the control plane software) running on x86 processor, Asterfusion® CX-T switches also support FusionNOS framework software running on two ARM SoC-based Intelligent Service Processing Unit*. Using the FusionNOS framework as the foundation, network developers can easily develop their own unique upper-layer business applications and if necessary, can also port various applications currently running on x86 processors onto the ARM processors for higher-performance and/or cost-efficiency.

Data plane software upgrade for investment protection

Compared with fixed-function switching chip, the protocol-independent switching chip used in Asterfusion® CX-T switches can adapt new functions needed for emerging network protocols and business applications through a data plane software development process. This data plane software development cycle normally takes a few weeks while similar functional changes in the fixed-function switching chip would involve multi-years of ASIC development efforts. The deployment of new functions in the Asterfusion® CX-T switches will go through the software upgrade process with zero impacts on the hardware platform and hence, protect customers’ capital equipment investment.

Why Asterfusion® CX-N Switches

Advanced service functions for cloud data center networks

Asterfusion® CX-T switches can support advanced networking functions such as DCB, ECN, RoCE, DCTCP, DCQCN, and multi-path resilient hash needed in building converged Ethernet networks with low latency, near-zero packet loss, and line-rate performance packet forwarding, achieving triple convergence of Compute, Storage, and Network service functions in modern cloud data centers.

Accurate and comprehensive real-time network telemetry data

Asterfusion® CX-T switches can provide accurate and comprehensive real-time INT and vINT (virtual INT - INT for Virtual Overlay Networks) telemetry data. Through detailed analysis of the INT/vINT data, cloud data center network can now carry out auto-operation, auto-repairment, real-time QoS optimization, etc. Furthermore, INT/vINT data analysis on mission-critical business applications would create even higher impacts on the bottom line, thus helping customers to build-up efficient, resilient, and profitable cloud data center intelligent network operations.

Open control software & on-demand DevOps CI/CD

The control plane software of Asterfusion® CX-T switches, AsterNOS, is based on open source SONiC software platform. It can support standard container architecture and Redis in-memory database mechanism, allowing on-demand DevOps CI/CD (continuous integration/continuous deployments) all within standard Linux development environment; Through the REST API invoked by the cloud data center management platform, AsterNOS would also allow cloud data center administrators to take full advantages of all the build-in network capabilities within the Asterfusion® CX-T switches.

ZTP & ONIE suport for significant OAM workload reduction

With ZTP, Asterfusion® CX-T switches can retrieve configuration files from local or file servers and then load the configurations into the switches automatically. With ONIE, Asterfusion® CX-T switches can automatically install, upgrade and manage different versions of network operating software. This combination of ZTP and ONIE would allow data center administrators to cut down the OAM workload and hence significantly reduce the overall network operation cost.

Highly-integrated switch architecture for network convergence

The hardware platform of Asterfusion® CX-T switches follows the open transparent principles set by the OCP (Open Compute Project). Besides the P4 programmable switching chip, Asterfusion® CX-T switch also integrates an x86-based control plane unit, two ARM SoC-based intelligent service processing units and 2*25Gbps dedicated INT front-panel ports all within a 1U space. With this fully flexible and highly integrated switching architecture, network control plane, stateless forwarding plane, stateful functional plane, and telemetry visibility plane can all converge into an unified system and hence offers cloud data center developers the innovation platform to create their own high-value applications such as deep service processing and application offloading.


Application Scenarios

Highly agile & highly resilient small-medium sized data centers

Scenario 1

In the scenarios where data centers need to have a highly agile and highly resilient infrastructure for rapid evolving business models and applications, Asterfusion® CX-T switches can support protocol-independent switching functions such as flexible adjustment of FDB space, new or proprietary protocols parsing, multi-path resilient-hash packet forwarding, and fine-grained congestion control. Coupled with Asterfusion control plane software (AsterNOS) and intelligent fabric controller (AFC), Asterfusion® CX3-T and CX5-T cloud switches with 100G interconnection capability can be used to build up 2-tier spine-leaf mesh networks with superb horizontal scalability and multi-service bearing capability.

Highly-interconnected & highly-optimized large-scale cloud data center networks

Scenario 2

The combination of industry-leading 100G-port density of Asterfusion® CX564P-T as the Spine switches and non-oversubscribing Asterfusion® CX312P-48Y-T as the TOR switches coupled with CX532P-T as the Leaf switches would allow customers to build up 3-tier mesh data center mesh networks that can support up to 65,536 servers. In addition, all the Asterfusion® CX3-T and CX5-T switches come with 2*25G dedicated telemetry ports in their front panels, which would allow cloud data center administrators to collect as much INT information they need to optimize their business operations as possible.

Edge gateway for cloud data center interconnections

Scenario 3

The integrated ARM SoC-based intelligent service processing units inside the Asterfusion® CX3-T switches can carry out high-valued network service functions such as SSL decryption/encryption, service functioning chaining, stateful flow load-balancing and network address translation. Therefore, Asterfusion® CX3-T switches can be positioned and deployed as edge gateway devices to provide secured interconnections and layer-2 network interoperability between core and regional data centers in mega-sized enterprises and state own entities.

Related Products

Let us help you build an open cloud network

Contact us

Contact us


400-098-9811

  • Sales:
    This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Support:
    This email address is being protected from spambots. You need JavaScript enabled to view it.


  • Changsha(head office):
    Room 805, North Tower of Jinmao Plaza, No. 1177 Huanhu Road, Changsha
  • Beijing:
    Room207, Building 20, Aobei Science and Technology Park, Haidian District, Beijing
  • Suzhou:
    Floor 4, Building A2, Shahutiandi, No.192 Tinglan Road,SIP


  • Xi'an:
    No.5-212,Building 5, Creative Industry Park, No.109 Xingfu South Road, Xincheng District, Xi'an
  • Wuhan:
    No.2603,Building 4, Wanda Global International Center, No.28 Songzhu Road, Fruit Lake Street, Wuchang District, Wuhan

Copyright ©2021 Asterfusion Data Technologies Co., Ltd.  苏ICP备17070048号-2